My Cart
Toggle Nav

Kodiak Medium Duty - 6ft Cutter

$1,750.00
In stock
This product must be backordered. We ship your order complete once more stock becomes available, usually in about 7 to 10 days.
SKU
RC-MD72K

Specifications

  • KODIAK MD72
  • 3-Point 6 foot Rotary Cutter
  • Catagory 1 hitch
  • Floating top link
  • Cutting Capacity: 2 inches
  • Deck thickness: 11 gauge
  • Side channels: 7 inch heavy duty
  • PTO drive shaft included, shear pin style
  • Gear box: 90 HP
  • Stumpjumper: 5/8 inch solid
  • Cutting capacity: 2 inch material
  • Wheel: Solid laminated with greasable hub
  • Quick hitch compatible
  • Chain guards are not included but can be ordered
  • Weight: 745 lbs.
  • Use Lube 00 Grease With Extreme Pressure Additives 32 oz. This product will not run out at the check plug port unless the gearbox is hot. Otherwise it will not hardly ooze in the gel state when it cools.
  • 5 year limited gearbox warranty

For performance and a smooth cut, choose this 5 ft. medium duty rotary cutter by KODIAK. This is a lift type 3-point rotary cutter built solid with an 11 gauge steel deck and a 5/8 in. solid stump jumper. This rotary cutter can handle materials up to 2 in. in diameter.

WARNING Products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, visit www.P65Warnings.ca.gov

Made by KODIAK, this is a medium duty rotary cutter that is 6 feet wide. The deck is constructed out of 11 gauge steel and 7"

HD side channels. The rotary cutter is equipped with a 5/8 inch solid stumpjumper and a solid laminated wheel that will resist

punctures. MD72 can cut through bush up to 2 inches in diameter. 

Write Your Own Review
You're reviewing:Kodiak Medium Duty - 6ft Cutter
Your Rating