Toggle Nav
1-800-333-9143
My Cart

Rear Rim Bolt Assembly with Nut

$5.25
In stock
SKU
370938S36WN
  • Includes the nut and carriage bolt.
    • 5/8-18NF Thread Carriage Bolt
    • 2-1/2" Long
  • NOTE: This Bolt is for our replacement rims ONLY. It is a little shorter than the Original Bolt on Some Models.
  • Needing the Nut? See 33806S7
  • Need a Flat Washer? See 58FW
  • For Ford Models We Offer a Kit of (6) With Nuts and Flat Washers - See 350719KIT; It is a longer bolt than the one listed here and is designed to fit the Original Rims perfectly.
  • Normally 4-6 are used per rim (Depending on Rim and Tractor Model)
  • Priced Each and Sold Individually

WARNING Products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.For more information, visit www.P65Warnings.ca.gov

Allis Chalmers - Fits: Fits following using 4 or 6 loop (114713C1, NCA1020B etc.) replacement rim: ED40 (All with stamped steel dish), Fits following when using 6 loop (NCA1020B style) replacement rim): RC, WC, WD (Early Models Using 6 Loop Rim)

Case - Fits: [ Fits following using 4 or 6 loop (114713C1, NCA1020B etc.) replacement rim: 200, 200B, 210B, 211B, 300, 300B, 301, 302, 302B, 310, 310B, 311, 311B, 312, 312B, 320, 320, 320B, 400B, 411B, 420B, 420BD, 430, 430CK, 431, 440, 441, 470, 480, 480CK, 500B, 510B, 530, 530CK, 530 Construction King, 531, 540, 541, 570, 580B, 580 Construction King, 600B, 610B, 611B, 614B, 630, 631, 632, 634, 640, 641, 642, 644 (All with stamped steel dish) ]; Replaces: G10701

Cockshutt - Fits: CO-OP, Fits following using 4 or 6 loop (114713C1, NCA1020B etc.) replacement rim: E2 (All with stamped steel dish), [ Fits following using 4 or 6 loop (114713C1, NCA1020B etc.) replacement rim: 20, 540 (All with stamped steel dish) ]; Replaces: P5515

Ford - Fits: [ Fits following using 4 or 6 loop (114713C1, NCA1020B etc.) replacement rim: 1801, 1811, 1821, 1841, 1871, 1881, 2000 4 cylinder, 2030, 2031, 2100, 2110, 2111, 2120, 2121, 2130, 2131, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2600V, 2610, 2N, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3430, 345C, 345D, 3500, 3550, 3600, 3600V, 3610, 3900, 3910, 4000 4 cylinder, 4000SU, 4030 3 Cylinder, 4031, 4040, 4100, 4110, 4120, 4121, 4131, 4140, 4190, 420, 4200, 4330, 4340, 4410, 445, 445A, 445C, 445D, 4600, 4600SU, 4610, 501, 530A, 531, 532, 540, 540A, 540B, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 8N, 900, 901, 941, 950, 951, 960, 961, 971, 981, 9N, Golden Jubilee, Jubilee, NAA, NAB (with standard stamped steel dishes) ]; Replaces: 33806S34, 33806S36, 33806S7, 350719S8, 370938S36, 370938S43, 408, 81821369

Fordson - Fits: [ Fordson, Fits following using 4 or 6 loop (114713C1, NCA1020B etc.) replacement rim: Dexta, Super Dexta (with standard stamped steel dishes) ]

International / Farmall - Fits: [ Fits following using 4 or 6 loop (114713C1, NCA1020B etc.) replacement rim: 100, 130, 140, A, BN, Super A, Super A-1, Super A-1 (All with stamped steel dish, (Normally left side only)) ], [ 2300, 2300A, 240, 2400, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 330, 3414, 3444, 3514, 354, 364, 384, 385, 404, 424, 433, 434, 444, 454, 464, 474, 484, 485, 574, 584, 585, 606, 664, 674, 684, 685, 885, B-250, B-275, B-276, B-414 (All with stamped steel dish) ], B (All with stamped steel dish, (Normally left side only)), [ UTILITY, Fits following using 4 or 6 loop (114713C1, NCA1020B etc.) replacement rim: 300, 340, 350, 460, 504, 544, 656 (All with stamped steel dish) ]; Replaces: 703929R1

John Deere - [ Fits following using 4 or 6 loop (114713C1, NCA1020B etc.) replacement rim: 1010, 1020, 1030, 1050, 1120, 1250, 1520, 1530, 1630, 1640, 1830, 1840, 2010, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2240, 2440, 300, 400, 420, 430, 435, 440, 820 3 cylinder, 830 3 cylinder, 840 3 cylinder, 920, 930, 940, 950 (All with stamped steel dish) ]; Replaces: 19H1863

Massey Ferguson - Fits: [ Fits following using 4 or 6 loop (114713C1, NCA1020B etc.) replacement rim: 130, 135, 150, 165, 175, 202, 203, 204, 230, 231, 235, 240, 245, 25, 35, 50, 65, F40, FE35, TE20, TEA20-85, TO20, TO30, TO35 (All with stamped steel dish) ]; Replaces: 180876M1, 353427X1

Massey Harris - Fits: [ Fits following using 4 or 6 loop (114713C1, NCA1020B etc.) replacement rim: 50, Colt (21), Mustang (23), Pacer (16), Pony (All with stamped steel dish) ]

Minneapolis Moline - Fits: [ Fits following using 4 or 6 loop (114713C1, NCA1020B etc.) replacement rim: 2 Star, 335, 3 Star, 445, 4 Star, A, BF, BG, BIG, Big Mo 400, Big Mo 500, G350, JetStar, JetStar 2, JetStar 3, Jetstar 3 Super, U302, U302 Super, V (All with stamped steel dish) ]

Oliver - Fits: [ Fits following using 4 or 6 loop (114713C1, NCA1020B etc.) replacement rim: 1250, 1250A, 440, 550, Super 44, Super 55 (All with stamped steel dish) ]

  • Includes the nut and carriage bolt.
  • 5/8-18NF Thread Carriage Bolt
  • 2-1/2" Long
  • NOTE: This Bolt is for our replacement rims ONLY. It is a little shorter than the Original Bolt on Some Models. Needing the Nut ? See 33806S7
  • Need a Flat Washer? See 58FW
  • For Ford Models We Offer a Kit of (6) With Nuts and Flat Washers - See 350719KIT; It is a longer bolt than the one listed here and is designed to fit the Original Rims perfectly.
  • Normally 4-6 are used per rim (Depending on Rim and Tractor Model)
  • Priced Each and Sold Individually
More Information
Meta Keywords Rear Rim Bolt Assembly with Nut, rims, wheel parts, rear rims, bolt assembly, antique tractor parts, 534003, NCA1020C, C5NN1050E, D9NN1050EA, rear rim parts, assembly with nut, antique restoration parts, rims, rims parts
Write Your Own Review
You're reviewing:Rear Rim Bolt Assembly with Nut