Toggle Nav
1-800-333-9143
My Cart

0-80 PSI Universal Oil Pressure Gauge for Allis Chalmers, Ford and More

$18.95
In stock
SKU
U0110
  • 1/8" NPT Male Thread
  • This oil pressure gauge has studs and a bracket.
  • There is no logo included on this gauge.
  • It has a black face with white letters.
  • This is a dash mounted gauge that requires a 2" diameter hole.
  • The gauge has a chrome bezel.
  • May Vary From Original Appearance.

NOTE:Unless you can reuse your old adapter fitting for the oil line to the gauge, you will need one of the following depending on the line size: STC538 (1/8" line) or 29898D, 8N18685 (1/4" line), or 9N18685 (3/16" line).

WARNING Products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.For more information, visit www.P65Warnings.ca.gov

Allis Chalmers- Fits: [ D15, D17, WD45 (Dsl. And others using 80 Lb. gauge) ], [ D19, D21, 170, 175, 180, 185, 190, 190XT, 210, 220 (And others using 80 Lb. gauge) ], [ U, UC (To SN #: 51344 And others using 80 Lb. gauge) ]; Replaces:228719,70228719

Case- Fits: [ C, CC, CC-3, CC-4, CCS, CH, CI, CO, D, DC, DC-3, DC-4, DCS, DEX, DH, DI, DO, DV, L, LA, LAH, LAI, LI, R, RC, S, SC, SC-3, SC-4, SI, SO, W10B, W10C, W10E, W14, W14H, W18, W20, W24, W24B, W26, W26B, W7, W7C, W7E, W8B, W8C, W8E, W9, W9B, W9C, W9E, 400, 401, 402, 403, 405, 410, 411, 412, 413, 414, 415, 420, 425, 500, 520, 600, 610, 620 (And others using 80 Lb. gauge) ], [ 310D, 310E, 310F, 310G (Crawler) ], 420C (DSL. Crawler); Replaces:A19346,A30326,D22853,D26894

Cockshutt- Fits: [ Co-Op : E3, E4, E5 (And others using 80 Lb. gauge) ], Co-Op: E2 (And others using 80 Lb. gauge), [ Cockshutt: 20, 30, 40, 40D4 Golden Eagle, 40PD Golden Eagle, 50, 550, 560, 570 (And others using 80 Lb. gauge) ]

Ford- Fits:Golden Jubilee, Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981; Industrials: 1801, 1811, 1821, 1841, 1871, 1881, 2000 4 cylinder, 2030, 2031, 2111, 2130, 2131, 4000 4 cylinder, 4030 4 cylinder, 4031, 4040, 4110, 4120, 4121, 4130 4 cylinder, 4140 (All Up to 1964) (And others using 80 Lb. gauge) ]; Replaces:FAD9273A

International / Farmall- Fits: [ H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, T340, T4, T5, T6, T6-61, T6-62, T9, TD340, W4, W6, W9, WR9, WR9S, 240, 300, 330, 340, 350, 3514, 3616, 3800, 3850, 400, 450, 460, 500, 560, 600, 650, 660 (And others using 80 Lb. gauge) ], [ ID6, ODS6, WD6 (To SN #: 4926, And others using 80 Lb. gauge) ], [ ID9, WD9, WDR9 (To SN #: 12425, And others using 80 Lb. gauge) ], [ MD, MDV (To SN #: 8246, And others using 80 Lb. gauge) ]

John Deere- Fits: [ R, 70, 720, 730, 80, 820 2 cylinder, 830 2 cylinder, 840 (All Dsl Only, And others using 80 Lb. gauge) ]

Massey Ferguson- Fits: TO30 (And others using 80 Lb. gauge), [ Ferguson: F40, TE20, TO20, TO35 (And others using 80 Lb. gauge) ], [ MF (Ag & Ind): 40, 50 (And others using 80 Lb. gauge) ], [ MF Industrial: 1001, 20, 202, 203, 204, 205, 2135, 2200, 2500, 30, 302, 304, 31, 356, 50, 60, 70, 80 (And others using 80 Lb. gauge) ], [ MF Tractor: 135, 150, 165, 175, 180, 35, 65, 85, 88, FE35, Super 90 (And others using 80 Lb. gauge) ]; Replaces:506902M92

Massey Harris- Fits: [ Colt (21), I-244, I-330, Mustang (23), Pacer (16), Pony, 101 Jr, 101 Sr, 102 Jr, 102 Sr, 20, 201, 202, 203, 22, 30, 303, 33, 333, 404, 44, 44-6, 444, 44 Special, 50, 55, 555, 81, 82 (And others using 80 Lb. gauge) ]; Replaces:761511M91

Minneapolis Moline- Fits: [ G1000, G1000 Vista, G1050, G900, G950 (And others using 80 Lb. gauge) ]

Oliver- Fits: [ 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1865, 1870, 1900, 1950, 1950T, 1955, 2050, 2055, 2150, 2155, 2255, 2270, 2655 (And others using 80 Lb. gauge) ]
Oliver Miscellaneous- Fits: Backhoe: 2-62 (And others using 80 Lb. gauge)

  • 1/8" NPT Male Thread
  • This oil pressure gauge has studs and a bracket.
  • There is no logo included on this gauge.
  • It has a black face with white letters.
  • This is a dash mounted gauge that requires a 2" diameter hole.
  • The gauge has a chrome bezel.
  • May Vary From Original Appearance.

NOTE:Unless you can reuse your old adapter fitting for the oil line to the gauge, you will need one of the following depending on the line size: STC538 (1/8" line) or 29898D, 8N18685 (1/4" line), or 9N18685 (3/16" line).

ABC005

More Information
Meta Keywords oil pressure gauge, universal, oil gauge, 80 pounds, 80 lb, 80 PSI, S60758, ABC005, A-9A580, tractor parts, tractor, parts, aftermarket, AC, engine parts, engine, engine parts, gauge, oil pressure, oil pressure gauge, oil pressure gauge not working, oil pressure gauge high, oil pressure gauge low, oil pressure gauge stuck on high, oil pressure gauge on dashboard, oil pressure gauge reading, oil pressure gauge bouncing
Write Your Own Review
You're reviewing:0-80 PSI Universal Oil Pressure Gauge for Allis Chalmers, Ford and More