Toggle Nav
1-800-333-9143
My Cart

40 HP Gearbox for Big Bee, Hico and More with 1-3/8" Spline Input Shaft

$209.95
Out of stock
This product must be backordered. We ship your order complete once more stock becomes available.
SKU
DH40GBSPLINE

Gearboxes work to administer a transfer of speed and torque through their internal gear rotation, helping the overall performance of your rotary cutter.
The housing is constructed from durable ductile iron and the input shaft measures 1-3/8 in. with 6 splines. It has a beveled type of gear, with the gear ratio measuring 1:1.47. Designed for use with 4 ft., 5 ft., and 6 ft. light duty or standard duty rotary cutters, this rotary cutter gearbox has 4 bolt holes measuring 5/8 in. on a 6-3/4 in. bolt pattern for installment.

Specifications

  • Horsepower: 40
  • For 4ft., 5ft., and 6 ft. light duty or standard duty rotary cutters
  • Housing construction: Ductile iron
  • 6 spline Input shaft: 1-3/8 in.
  • Gear ratio: 1:1.47
  • Gear type: Bevel gear
  • Bolt holes: 4, with 5/8 in. diameter
  • Bolt pattern: 6-3/4 in.
  • Output shaft 1-1/2" 12 Spline
  • Outside rotation: clockwise or counterclockwise with no modifications
  • Comes with the castellated nut and the carrier hub for the stump jumper (if needed)
  • This is will NOT work on a Finishing or Grooming Mower

Check out our selection of Rotary Mower Parts & Gearboxes.With a rated horsepower capacity of 40, this gearbox will provide an excellent operation to your rotary cutter.

NOTE:Afterthe pan and blades are installed onto the gearbox make sure when blades areturned back toward the gearbox shaft they do not hit the shaft or nut but clear it before using the rotary cutter.

WARNING Products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.For more information, visit www.P65Warnings.ca.gov

Gearboxes work to administer a transfer of speed and torque through their internal gear rotation, helping the overall performance of your rotary cutter.
The housing is constructed from durable ductile iron and the input shaft measures 1-3/8 in. with 6 splines. It has a beveled type of gear, with the gear ratio measuring 1:1.47. Designed for use with 4 ft., 5 ft., and 6 ft. light duty or standard duty rotary cutters, this rotary cutter gearbox has 4 bolt holes measuring 5/8 in. on a 6-3/4 in. bolt pattern for installment.

Specifications

  • Horsepower: 40
  • For 4ft., 5ft., and 6 ft. light duty or standard duty rotary cutters
  • Housing construction: Ductile iron
  • 6 spline Input shaft: 1-3/8 in.
  • Gear ratio: 1:1.47
  • Gear type: Bevel gear
  • Bolt holes: 4, with 5/8 in. diameter
  • Bolt pattern: 6-3/4 in.
  • Output shaft 1-1/2" 12 Spline
  • Outside rotation: clockwise or counterclockwise with no modifications
  • Comes with the castellated nut and the carrier hub for the stump jumper (if needed)
  • This is will NOT work on a Finishing or Grooming Mower

Check out our selection of Rotary Mower Parts & Gearboxes.With a rated horsepower capacity of 40, this gearbox will provide an excellent operation to your rotary cutter.

NOTE:Afterthe pan and blades are installed onto the gearbox make sure when blades areturned back toward the gearbox shaft they do not hit the shaft or nut but clear it before using the rotary cutter.

Replaces: 87855

Write Your Own Review
You're reviewing:40 HP Gearbox for Big Bee, Hico and More with 1-3/8" Spline Input Shaft