75HP Gearbox with 1-3/8" Smooth Input Shaft for Bush Hog and more
Check out our selection of Rotary Mower Parts & Gearboxes. This rotary cutter gearbox can provide a high powered operation to your 5 ft., 6 ft., and 7 ft. rotary cutters.
Specifications
- Horsepower: 75
- For 5 ft., 6 ft., and 7 ft. standard duty or medium duty rotary cutters
- Outside rotation: clockwise or counterclockwise with no modifications
- Comes with the castellated nut and the carrier hub for the stump jumper (if needed)
- Housing construction: Ductile iron
- Input shaft: 1-3/8 in.
- Smooth shaft
- Gear ratio: 1:1.46
- Gear type: Bevel gear
- Bolt holes: 4, with 3/4 in. diameter
- Bolt pattern: 8 in.
- Output shaft 2" 15 Spline
- This Gearboxships DRY
- The Customer must add 90wt oil before using
WARNING Products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.For more information, visit www.P65Warnings.ca.gov
Gearboxes work to administer a transfer of speed and torque through their internal gear rotation, helping the overall performance of your rotary cutter. This 75HP Gearbox housing is constructed from durable ductile iron and the smooth input shaft measures 1-3/8 in. It has a beveled type of gear, with the gear ratio measuring 1:1.46. Designed for use with 5 ft., 6 ft., and 7 ft. standard duty or medium duty rotary cutters, this rotary cutter gearbox has 4 bolt holes measuring 3/4 in. on an 8 in. bolt pattern for installment.
Specifications
- Horsepower: 75
- For 5 ft., 6 ft., and 7 ft. standard duty or medium duty rotary cutters
- Outside rotation: clockwise or counterclockwise with no modifications
- Comes with the castellated nut and the carrier hub for the stump jumper (if needed)
- Housing construction: Ductile iron
- Input shaft: 1-3/8 in.
- Smooth shaft
- Gear ratio: 1:1.46
- Gear type: Bevel gear
- Bolt holes: 4, with 3/4 in. diameter
- Bolt pattern: 8 in.
- Output shaft 2" 15 Spline
- This Gearbox ships DRY
- The Customer must add 90wt oil before using
