Metric Driveline-Series 8 w/CVJ 6 Spline 51"
Specifications
- Series 8 PTO Shaft
- 1-3/8 inch 6 spline tractor end
- 1-3/4 inch 20 spline interfering bolt implement end
- Collapsed length: 51 inches
- Max extended length: 68.4"
- Constant velocity PTO assembly
- 91 HP at 540 RPM
- 145 HP at 1000 RPM
- For use with rotary cutters
- Shielding included
- Always keep shielding in working order and in place
NOTE: MEASURE BEFORE ORDERING
WARNING Products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.For more information, visit www.P65Warnings.ca.gov
Constant Velocity 1-3/8" 6 Spline X 1-3/4" 20 Spline PTO Shaft - 51" Long
This PTO shaft assembly is designed for use with pull type rotary cutter and is 51 inches long collapsed . It has a 1-3/8 inch 6 spline tractor end with a metal pull collar and a 1-3/4 inch 20 spline on the implement end and an interfering bolt to secure the PTO shaft to the implement. This series 8 PTO shaft has a 91 HP requirement for 540 RPM.
This is a constant velocity shaft assembly with an 80 u-joint for better maneuverability. The protective shielding is included. This shielding should be maintained and in working order for your safety.
Specifications
- Series 8 PTO Shaft
- 1-3/8 inch 6 spline tractor end
- 1-3/4 inch 20 spline interfering bolt implement end
- Collapsed length: 51 inches
- Max extended length: 68.4"
- Constant velocity PTO assembly
- 91 HP at 540 RPM
- 145 HP at 1000 RPM
- For use with rotary cutters
- Shielding included
- Always keep shielding in working order and in place
NOTE: MEASURE BEFORE ORDERING