Universal 4" X 8" Rotary Cutter Tail Wheel Assembly with 1" Axle
For many Rotary Cutters
Specifications
Tailwheel:
- 4" x 8" laminated tail wheel
- 15-3/8" OD x 3-3/4" width
- Rim has (4) - 1/2" ID mounting holes
Hub:
- Cast Hub with tapered bearings with a grease zerk
- Axle size is 1"
- 1" Axle Bolt with nylon locknut
- 1" ID Bushings
- Use TWHWB100 for replacement Hub With Bearings
Tail Wheel Fork:
- 1-1/2" Diameter Shank
- 1" axle hole,
- 8" Shaft Length
- 9-1/2" internal leg width (from axle bolt center)
Tail Wheel Kit does not come assembled, to assemble: simply bolt the heavy duty tail wheel hub onto the laminated tailwheel, push the bushings in on both sides of the hub and slip the fork over the wheel and slide in the axle bolt.
Tailwheel Assembly is found on many Rotary Cutters such as: Bush Hog, Big Bee, Ford, Hardee, Hico, Howse, Kodiak, IMCO, Southeast, Landpride, Mohawk, Schulte, Servis Rhino, Rhino, Sidewinder, Woods, Tiger and Others
WARNING Products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.For more information, visit www.P65Warnings.ca.gov
For many Rotary Cutters
Specifications
Tailwheel:
- 4" x 8" laminated tail wheel
- 15-3/8" OD x 3-3/4" width
- Rim has (4) - 1/2" ID mounting holes
Hub:
- Cast Hub with tapered bearings with a grease zerk
- Axle size is 1"
- 1" Axle Bolt with nylon locknut
- 1" ID Bushings
- Use TWHWB100 for replacement Hub With Bearings
Tail Wheel Fork:
- 1-1/2" Diameter Shank
- 1" axle hole,
- 8" Shaft Length
- 9-1/2" internal leg width (from axle bolt center)
Tail Wheel Kit does not come assembled, to assemble: simply bolt the heavy duty tail wheel hub onto the laminated tailwheel, push the bushings in on both sides of the hub and slip the fork over the wheel and slide in the axle bolt.
Tailwheel Assembly is found on many Rotary Cutters such as: Bush Hog, Big Bee, Ford, Hardee, Hico, Howse, Kodiak, IMCO, Southeast, Landpride, Mohawk, Schulte, Servis Rhino, Rhino, Sidewinder, Woods, Tiger and Others
